HIGH PRESSURE COOLANT SYSTEMS
Enlarge
Enlarge
Model No : WB-1020M
Product Description
Motor:2 HP (3-PHASE) | Pressure:20 kgf/cm2 | Suction Volume: 23.5 L/Min.
Product Introduction

Pump

·           Direct-drive design between pump and motor eliminates the need to adjust belts and simplifies maintenance and repair.

·           Pumps of good quality and excellent performance are 100% made in Taiwan.

·           Industrial ceramic plunger and special packing design are easy to maintain and have a longer service life.

·           No auxiliary water tank design, which is easy to install. (Tool machine water tank capacity must be larger than 3 times the selected model.)

·           Plunger pump provides stable pressure and water volume, regardless of the ratio of water-based cutting fluid or cutting oil.

Electronic Control System

·           When changing knife by M code, the system will automatically release the pressure to prevent inaccurate positioning due to residual pressure.

·           The filter detection system sends out warnings when there is filter failure or no water supply, and will tell users when the filter needs to be replaced.

·           No dripping nozzles: the special hose design prevents nozzles from dripping when the user replaces the finished workpiece with the unfinished one, so that the machining environment is kept clean.

 

Model

Working Pressure (Kgf/cm2)

Suction Volume

(L/Min.)

Horsepower

HP

Φ

Volt

Hz

WB-1020M

20

23.5

2

3

220

60

※1). Filters of 5µ, 25µ, 50µ are available; standard equipped with 5µ. 2).Voltage and frequency can be customized.

Dimensions(mm)
proimages/product/HIGH_PRESSURE_COOLANT/dimensions/WB-1020M-DIM.jpg

B-01/No. 2 Filter Mesh

5µm

proimages/product/HIGH_PRESSURE_COOLANT/180x180/B-01.jpg

B-02/Oil Filter Cartridge (Inlet)

Thread PT1-1/2”

proimages/product/HIGH_PRESSURE_COOLANT/180x180/B-02.jpg

B-03/Filter Cartridge
(the second stage filter cartridge)

Φ70x195L

proimages/product/HIGH_PRESSURE_COOLANT/180x180/B-03.jpg