Starting from July 2025, we will launch new WN misting products. The old series will discontinued after they are sold out. Thank you for your understanding.

WM-1001B-M high pressure misting system unit

Enlarge

Additional files

MIST_SYSTEM_MANUAL(2014V).pdf WM_MISTING_PUMP_MANUAL(2019.04V).pdf

Product Description

Working Pressure：70~65 kgf/cm² | Suction Volume：0.9~1 L/Min.

Product Introduction

WM-1001B-M Industrial High Pressure Misting System | Factory Cooling & Outdoor Heat Reduction

WM-1001B-M Industrial High Pressure Misting System

An industrial high pressure misting system engineered for factory cooling, warehouse ventilation, outdoor heat reduction, and industrial heat stress management. The system utilizes ultra-fine atomization and evaporative cooling technology to reduce ambient temperature, improve thermal comfort, and enhance cooling efficiency in demanding industrial and commercial environments.

Industrial Cooling System Positioning

The system integrates a 3-stage timer control to support continuous and cyclic misting operation based on environmental cooling demands.

This system is designed as a fixed high pressure evaporative cooling solution for industrial and commercial cooling applications. Unlike ordinary circulation fans, the system actively reduces surrounding temperature through ultra-fine mist atomization and evaporative cooling.

Basic piping and nozzle installation are required, allowing flexible configuration according to installation area size, heat source intensity, airflow conditions, and cooling requirements.

Suitable for industrial cooling projects, outdoor cooling systems, commercial cooling applications, and semi-open working environments.

Engineering-Oriented Cooling Design

Different installation environments require different nozzle density, piping layouts, operating pressure configurations, and airflow coverage planning.

WULI provides application-based cooling recommendations according to cooling area size, ambient temperature conditions, humidity levels, and heat source distribution.

The modular piping design allows flexible installation for industrial facilities, outdoor commercial spaces, livestock farms, and large-area cooling environments.

Cooling Applications

Factory cooling and industrial heat stress reduction
Warehouse ventilation and ambient temperature reduction
Livestock farm environmental cooling systems
Outdoor construction site cooling applications
Restaurant patio and outdoor seating cooling
Commercial outdoor mist cooling systems
Semi-open industrial workspaces
Agricultural and greenhouse cooling applications
Industrial ventilation and cooling efficiency improvement

System Features & Technical Advantages

1000 PSI ultra-fine high pressure atomization technology
Rapid evaporative cooling performance for heat reduction
Stable pressure output for multi-nozzle operation
Continuous-duty industrial operation design
Flexible piping configuration based on installation area
Suitable for high temperature industrial environments
Energy-efficient cooling and ventilation solution
Low maintenance industrial cooling configuration
Supports OEM / ODM industrial cooling projects
Designed for long operating hours and industrial reliability
3-stage timer control system for flexible misting operation (continuous / interval / cycle modes)

Cooling System Selection Guide

Different cooling environments may require different nozzle quantities, piping layouts, and cooling coverage configurations.

Small working areas → single-zone mist cooling
Medium factories → sectional piping systems
Large open spaces → multi-zone cooling configuration
Outdoor patios → perimeter mist line installation
High heat environments → increased nozzle density planning

Providing site photos, floor layouts, or cooling area dimensions can help optimize system recommendations and cooling performance.

Frequently Asked Questions

Can this misting system reduce industrial heat effectively?
Yes. The system utilizes evaporative cooling technology to reduce ambient temperature and improve thermal comfort in industrial and outdoor environments.

Does the system require installation?
Yes. Basic piping and nozzle installation are required depending on the cooling area and application environment.

Can the nozzle quantity and piping layout be customized?
Yes. System configuration can be adjusted according to installation area size, cooling coverage requirements, and heat source distribution.

Will the mist wet the floor?
Under normal operating conditions, ultra-fine mist droplets evaporate rapidly and help minimize surface wetting.

Can the system operate continuously for long periods?
Yes. The system is designed for industrial continuous-duty operation and long-hour cooling applications.

What voltage and frequency options are available?
Models are available in 50Hz 220V / 230V and 60Hz 110V / 220V configurations depending on regional requirements.

Get Cooling System Layout & Proposal Within 24H

Send your application requirements, cooling area size, or layout drawings for engineering recommendations and piping configuration suggestions.

Get Engineering Proposal

Industrial Cooling System ｜ Outdoor Cooling ｜ Commercial Cooling ｜ OEM / ODM ｜ Global Supply

Specification

Model	Motor Power						Suction Volume		Nozzles	Working Pressure
Model	HP	KW	Volt	Hz	ø	R.P.M	L/min	Gpm	0.15mm	kgf/cm²	p.s.i
WM-1001B-5M	0.27	0.2	230	50	1	1420	0.9	0.24	18	70	1000
WM-1001B-6M	0.27	0.2	110	60	1	1720	1	0.26	20	65	920
WM-1001B-6M	0.27	0.2	220	60	1	1720	1	0.26	20	65	920
Dimensions: 43x33x30 cm							Weight: 14 kgs

*THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE FOR THE PURPOSE OF IMPROVEMENT OF THE PRODUCT.

WM-1001B-M misting system dimensions and installation size diagram

Model	Motor Power						Suction Volume		Nozzles	Working Pressure
Model	HP	KW	Volt	Hz	ø	R.P.M	L/min	Gpm	0.15mm	kgf/cm²	p.s.i
WM-1001B-5M	0.27	0.2	230	50	1	1420	0.9	0.24	18	70	1000
WM-1001B-6M	0.27	0.2	110	60	1	1720	1	0.26	20	65	920
WM-1001B-6M	0.27	0.2	220	60	1	1720	1	0.26	20	65	920
Dimensions: 43x33x30 cm							Weight: 14 kgs