Mist Cooling Systems
Enlarge
Enlarge
Product Description
Working Pressure：70 kgf/cm2 | Suction Volume：3.6 L/Min.
Product Introduction
- 1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
- Nickel-plated forged brass manifold resists rust and corrosion.
- Patented internal rinse cooling design to increase pump life.
- Dual bearing design to lower the heat and noise level down to 75 dB.
- Automatic pressure valve controls the consistency of the pump pressure.
- Circuit breaker for electrical safety if the voltage is outside of the safety parameter.
- 24-hour timer with 8 settings for minutes and seconds to set the misting intervals as well as pressure release.
- Inlet filter system increases the pump's life and reduces clogged nozzles.
- Choose either Wuli's patented stainless steel pipe or high-pressure hose for quick installation and high durability.
- Water Tank: Pump overflow is automatically sent back to the tank to conserve water.
Specification
| Model | Motor Power | Suction Volume | Nozzles | Working Pressure | ||||||
| HP | Volt | Hz | ø | R.P.M | L/min | Gpm | 0.15mm | kgf/cm2 | p.s.i | |
| WN-1003-5MR | 1/2 | 230 | 50 | 1 | 710 | 3.6 | 0.94 | 40~65 | 70 | 1000 |
| WN-1003-6MR | 3/4 | 220 | 60 | 1 | 1150 | 3.6 | 0.94 | 39~63 | 70 | 1000 |
| Dimensions: 61x51x41 cm | Weight: 37 kgs | |||||||||
| Model | Motor Power | Suction Volume | Nozzles | Working Pressure | ||||||
| HP | Volt | Hz | ø | R.P.M | L/min | Gpm | 0.15mm | kgf/cm2 | p.s.i | |
| WN-1003-5MR | 1/2 | 230 | 50 | 1 | 710 | 3.6 | 0.94 | 40~65 | 70 | 1000 |
| WN-1003-6MR | 3/4 | 220 | 60 | 1 | 1150 | 3.6 | 0.94 | 39~63 | 70 | 1000 |
| Dimensions: 61x51x41 cm | Weight: 37 kgs | |||||||||
Applications:
★ Residential cooling
★ Industrial cooling
★ Commercial cooling
★ Agriculture and greenhouse use
★ Special landscaping effects
★ Dust/odor control
★ Air condition condenser pre-cooling
High Pressure Misting Hose:
Stainless Steel Pipe:
