Model No : WN-1004-5
Product Description

Working Pressure:70 kgf/cm2 | Suction Volume:4.8 L/Min.

Product Introduction
  • 1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
  • Nickel-plated forged brass manifold resists rust and corrosion.
  • Patented internal rinse cooling design to increase pump life.
  • Dual bearing design to lower the heat and noise level down to 75 dB.
  • Automatic pressure valve controls the consistency of the pump pressure.
  • Circuit breaker for electrical safety if the voltage is outside of the safety parameter.
  • Choose either Wuli's patented stainless steel pipe or high-pressure hose for quick installation and high durability.
Model Motor Power Suction Volume Nozzles Working Pressure
HP Volt Hz ø R.P.M L/min Gpm 0.15mm kgf/cm2 p.s.i
WN-1004-5 1 230 50 1 950 4.8 1.26 54~87 70 1000
Dimensions: 47x25x22 cm Weight: 18 kgs
*THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE FOR THE PURPOSE OF IMPROVEMENT OF THE PRODUCT.


proimages/product/MISTING/dimensions/WN-1003-6.jpg

Applications: 
★ Residential cooling
 Industrial cooling
 Commercial cooling
 Agriculture and greenhouse use
 Special landscaping effects
 Dust/odor control
 Air condition condenser pre-cooling
★ Epidemic prevention
★ Disinfection
proimages/product/MISTING/accessory/Application.jpg
proimages/product/MISTING/accessory/Accessory-p13.jpg
proimages/product/MISTING/accessory/Accessory-p14.jpg

High Pressure Misting Hose:

proimages/product/MISTING/accessory/Accessory-p15_PE_HOSE.jpg
proimages/product/MISTING/accessory/Accessory-p15_PE_HOSE-1.jpg
proimages/product/MISTING/accessory/Accessory-p16_PE_HOSE-2.jpg

Stainless Steel Pipe:

proimages/product/MISTING/accessory/Accessory-p18_SST_PIPE.jpg
proimages/product/MISTING/accessory/Accessory-p17_SST_PIPE.jpg