Starting from July 2025, we will launch new WN misting products. The old series will discontinued after they are sold out. Thank you for your understanding.

Enlarge

Additional files

MIST_SYSTEM_MANUAL(2025V).pdf

Product Description

Working Pressure：70 kgf/cm² | Suction Volume：4.5 L/Min.

Product Introduction

1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
Nickel-plated forged brass manifold resists rust and corrosion.
Patented internal rinse cooling design to increase pump life.
Dual bearing design to lower the heat and noise level down to 75 dB.
Automatic pressure valve controls the consistency of the pump pressure.
Circuit breaker for electrical safety if the voltage is outside of the safety parameter.
24-hour timer with 8 settings for minutes and seconds to set the misting intervals as well as pressure release.
Inlet filter system increases the pump's life and reduces clogged nozzles.
Choose either Wuli's patented stainless steel pipe or high-pressure hose for quick installation and high durability.

Specification

Model	Motor Power					Suction Volume		Nozzles	Working Pressure
Model	HP	Volt	Hz	ø	R.P.M	L/min	Gpm	0.15mm	kgf/cm²	p.s.i
WN-1004A-5M	1	230	50	1	1450	4.5	1.18	49~80	70	1000

Dimensions: 57x36x39 cm						Weight: 38 kgs

*THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE FOR THE PURPOSE OF IMPROVEMENT OF THE PRODUCT.

proimages/product/MISTING/dimensions/WN-1003A-M.jpg

Model	Motor Power					Suction Volume		Nozzles	Working Pressure
Model	HP	Volt	Hz	ø	R.P.M	L/min	Gpm	0.15mm	kgf/cm²	p.s.i
WN-1004A-5M	1	230	50	1	1450	4.5	1.18	49~80	70	1000

Dimensions: 57x36x39 cm						Weight: 38 kgs